Contract machining: what to check before choosing a supplier

Anyone working in purchasing or design within a manufacturing company knows how it goes: you change machining suppliers not because the price is too high, but because something isn’t working. Slipped deliveries, borderline tolerances, communication breaking down at the wrong moment.
The problem, more often than not, isn’t the machine. It’s the organization behind it.

Available Technology and Batch Flexibility

The first question to ask a subcontractor is simple: what machines do you work with, and what batch sizes are you structured for?

This isn’t an abstract technical question, but a practical matter that directly impacts your bottom line. A CNC turning center and a sliding headstock lathe have completely different cost structures:

  • CNC turning center: it is the most efficient choice for complex geometries and smaller batches.
  • Sliding headstock lathe: it drastically reduces the cost per part on higher volumes, but only if the part type is compatible with this machining process.

A serious supplier knows these dynamics perfectly and communicates them transparently right from the start. Conversely, a less reliable supplier accepts any job, only to end up poorly managing the machining processes that aren’t suited to them.

Materials: Declared Experience vs. Real Experience?


Brass, stainless steel, aluminum, alloy steels like 42CrMo4 or 11SMnPb37: every material behaves differently during machining, requiring specific cutting parameters and dedicated tools. Ask your supplier how many active references they have for that material.

Not how many they have machined in total — how many they are working on right now, continuously. A material that isn’t regularly run in the workshop results in longer setup times, higher scrap rates, and less stable tolerances.

Tolerances and Control: The Process Matters More Than the Tool

Having a CMM (Coordinate Measuring Machine) on the shop floor makes a great impression, but it guarantees nothing if inspection is only done randomly at the end of the batch.

Tight tolerances (±0.01 / ±0.02 mm) aren’t certified at the end: they are managed by actively intervening throughout the entire production phase, not when the parts are already finished.

The supplier test: Always ask how their in-process control is structured. If the answer is vague or evasive, the risk to your order is real and tangible.”

A concrete example

A customer sent us a part in AISI 316, a Ø21 drilled pulley, with a hole tolerance of ±0.010 mm, for a batch of 10,000 pieces.

Ecco le migliori opzioni per tradurre questa frase, usando la terminologia tecnica d’officina corretta:
“Before confirming feasibility, we analyzed the drawing with our technical department, verified compatibility with the workshop, and estimated the machining cycle. Only then did we formulate our offer.

This isn’t bureaucracy: it’s how we avoid promising something we can’t deliver.

What to ask us

If you have a component to evaluate — a drawing, a specification, a batch to optimize — send us the technical documentation.

We will analyze feasibility with no obligation and tell you directly whether we are the right supplier for that machining process, or if we are not.

Article's details